Fast AC Repair in Weatherford - Cool Today

Upon arrival, the customer reported that the system had been underperforming for weeks. I hooked up gauges and discovered slightly irregular refrigerant levels. The condenser coil was heavily coated with dust and dirt, obstructing visibility of the fence. I thoroughly washed the condenser coil, rechecked the refrigerant levels, and found no other issues. The system is now running efficiently in cool mode.

Upon arrival, the system was not cooling efficiently. Diagnostic readings revealed a subcooling of less than 1 and a superheat of 30, indicating a refrigerant deficiency. Using an IR leak detector, I conducted a thorough search and identified a leak in the bottom right side of the evaporator coil. Given the system's age and current condition, I recommended a replacement. There were no existing warranties on the system. I scheduled a meeting with the Comfort advisor to discuss the findings and recommendations with the customer, set for tomorrow afternoon.

I conducted a comprehensive tune-up on an 11-year-old Carrier heat pump. All electrical connections were inspected, found to be tight, and free of corrosion. The refrigerant levels were checked against the outdoor data tag, showing a target Subcool of 14 but an actual Subcool of 4.4. The compressor inrush was 121.3 amps, slightly exceeding the manufacturer's recommended LRA of 108 amps. The capacitor was within specifications. The condenser fan motor operated within the acceptable amp range. The indoor coil was clean, while the blower wheel had mild dust and dirt buildup. The condensate pan had mild rust, and the evaporator coil u-joints showed some rust. The drain was clear and functioning properly. Recommendations include installing a drain safety, surge protector, micro air soft start, and a CCC.

Upon inspection, the toilet bowl was not filling completely, causing inefficient flushing. I diagnosed the issue as a faulty fill valve. I replaced the existing fill valve with a new one, ensuring proper water flow and a complete fill. The toilet now operates efficiently, providing a satisfactory flush. This repair was performed without any warranty coverage.

Upon arrival, I identified that the incorrect parts were on-site, causing a temporary pause in the job. The correct blower housing and motor were ordered. After receiving the new parts, I swapped the legs from the old blower housing with the new one, as they were of the incorrect length. The major legs were undamaged and retained. I then replaced the blower housing with the new parts and installed the motor. A thorough check of the refrigerant levels was conducted, revealing no other issues. The system was left in a cooling state, ensuring optimal performance.

We successfully installed a Level 4 48k gas closet system, ensuring optimal performance and efficiency. The project involved precise measurements, installation of high-quality components, and rigorous testing to meet stringent safety standards. Our team meticulously calibrated the system to guarantee it operates seamlessly within the specified parameters. The installation was completed on time, and the system is now fully functional, providing reliable and efficient heating.

00 and 3:00 PM, confirming the appointment with the office.

Upon arrival, I identified a failed 35mfd capacitor, which had been replaced just a week prior. Despite thorough investigation, the cause of the repeated failures remained unclear. To address the issue, I installed a Turbo capacitor, aiming to prevent future failures. Refrigerant levels were confirmed to be within specifications, and the system was operational and cooling effectively upon my departure.

Today, I assisted the customer in evaluating various options for their home improvement project. We thoroughly discussed the pros and cons of each choice, ensuring they understood the benefits and potential outcomes. I provided detailed explanations and visual aids to help them make an informed decision. The customer appreciated the comprehensive overview and felt confident in their choice. They plan to finalize their decision this evening, having a clear understanding of the options available. My goal was to ensure they felt supported and knowledgeable throughout the process.

30 PM tomorrow, I will be conducting a comprehensive comfort assessment. This includes a thorough inspection of the heating, ventilation, and air conditioning systems to ensure optimal performance. I will evaluate the insulation levels, check for any air leaks, and assess the overall energy efficiency of the home. Additionally, I will review the current thermostat settings and provide recommendations for adjustments to enhance comfort and reduce energy consumption. The assessment will also cover humidity levels and indoor air quality, ensuring a healthy living environment. I will provide a detailed report with findings and actionable recommendations.

We addressed the sulfur smell issue by attempting to remove the existing magnesium anode rod from the water heater. Despite our efforts using both manual and impact tools, the anode could not be removed without causing potential damage to the one-year-old water heater. Consequently, we ceased the operation to prevent any harm. No repairs were made, and there are no visible leaks. We also flushed the water out of the tank. Please note, there is no warranty on the water heater or its parts. No charges were applied as no repairs were performed.

The customer, whose home is three years old, reported several issues. I inspected the property thoroughly, identifying problems with the foundation, electrical wiring, and plumbing. I provided detailed findings and recommendations, emphasizing the importance of consulting the home builder. I ensured the customer understood the potential implications of not involving the builder before proceeding with any repairs.

On 9/18/26, I arrived to address a system that had frozen over the past two days. The customer had been informed by the office that it would take some time to resolve the issue. Upon evaluation, I found that the customer had reset all breakers, and the system did not freeze that day. I explained that the blower would ramp up and slow down while it was freezing. I checked the refrigerant levels and blower configuration, discovering that the blower was set to speed tap 4 with .5 static pressure at 1550 CFM. The outdoor unit is a 4-ton system requiring 1800 CFM speed tap at.5 static pressure per the manufacturer, which is 1750 CFM. I adjusted the speed tap from 4 to 5 and ordered a fan speed relay. The model is AED-L-004+FCLL20, and the serial number is C25-00015265. If the customer calls, they need to be prioritized, and they should be advised to leave the system alone until a technician arrives.

I reached out to the customer to discuss their recent inquiry regarding our services. Upon contacting them, I learned that the customer was currently engaged in a meeting and unable to engage in a conversation at that moment. Understanding the importance of their time, I assured them that I would follow up with them later. The customer expressed her willingness to return my call once her meeting concluded, and I confirmed the details for the callback. I patiently awaited the customer's call, ensuring that I would address their concerns and provide them with the necessary information to make an informed decision about our services.

I replaced both the upper and lower water heater elements, including their thermostats. The lower element was replaced due to sediment buildup, which could not be guaranteed. The customer opted for the Comfort Care Club upgrade. The work was completed, and the customer requested the water heater to run. The temperature and pressure relief valve is slowly dripping, but the customer chose to leave it as is.

Upon arrival, the customer reported that the mini split heads were displaying an E1 error code and were not functioning. During the evaluation, the system operated without issues, and refrigerant levels were within the acceptable range. However, due to the older version of the mini split, we were unable to run diagnostics on the heads. The LED status codes at the heat pump indicated that the system was limiting its frequency to prevent overheating or excessive pressure buildup. Additionally, the condenser coil was found to be dented and covered in dust and dirt. We recommended the customer clean the condenser coil from the inside out and monitor the system's performance. If the issue persists, we advised scheduling a visit from a Comfort Advisor.

I conducted a comprehensive tune-up on an 8-year-old Amana 2-stage straight cool gas furnace. This included checking and tightening all electrical connections, replacing the customer-provided filter, and ensuring refrigerant levels were acceptable. The dual run capacitor was verified to be within manufacturer specifications. A failed compressor saver was replaced under warranty. The condenser coils were meticulously cleaned from the inside out and waxed. Additionally, I discussed the benefits of a Continuous Commissioning Contract (CCC) with the customer. An appointment is scheduled for Tuesday, 9/22, to discuss a potential UV system upgrade.

Upon arrival, I identified that the pump was not functioning, resulting in no water flow. Upon inspection, I discovered that the wires connected to the pump had shorted out. I carefully traced the wiring to locate the faulty section. After repairing the damaged spot, I conducted a thorough test to ensure the integrity of the repair. The pump was then reactivated, and I verified that it was operating correctly. The water flow has been restored, and the system is now fully functional. All components were checked for proper operation, and no further issues were found.

Upon arrival, the heat pump displayed an L6 code, indicating an open start circuit. After inspection, the capacitor was found to be weak and was replaced. Following the replacement, the system started running smoothly. I discussed the recurring issues with the customer, recommending the installation of micro air soft starts to prevent future problems. The customer agreed, and I left the system running in cool mode.

I inspected and tightened all electrical connections on the 2023 Trane Airhandler, ensuring secure and efficient operation. The drain was clear and functioning properly, and the filter had been recently changed. The blower motor and wheel were in acceptable condition. However, there was slight biological growth on the evaporator coil and supply plenum, and the fresh air filter was extremely compacted. I washed the fresh air filter with water to restore its functionality. For the 2023 Trane Heatpump, I checked and tightened all electrical connections, verified that the dual run cap was within the manufacturer's range, and confirmed the primary electrical unit was acceptable. The defrost board, refrigerant levels, fan blades, motor, and condenser coils were all in good condition. I cleared debris from the bottom of the unit, washed the condenser coils from the inside out, and waxed the top of the unit. I recommended a UV system to address the biological growth and installed a Micro Air S

Upon inspection, it was determined that a restriction in the evaporator coil was impeding the home's cooling efficiency. To resolve this issue, the faulty evaporator coil needed to be replaced. The affected unit is a Comfortmaker air handler, model FEM4X4200BL, with serial number F192727017. The replacement was carried out under the parts-only warranty. The customer has already made a partial payment and will settle the remaining balance upon completion of the work.

I completed an upgrade to the CCC system. A thorough plumbing tune-up was performed, ensuring all pipes and fixtures were in optimal condition. The customer had already replaced the water heater, which was previously located in an attic area. Currently, there are no issues with the home's plumbing. Additionally, the pressure tank, currently stored in a designated area, will be relocated along with the water heater to their new positions.

I arrived at the site to perform a comprehensive inspection and maintenance of the HVAC system. Upon initial assessment, it was evident that the system required immediate attention. I conducted a thorough evaluation, identifying several critical issues that needed addressing. However, due to unforeseen circumstances, the client requested to reschedule the service. I ensured all preliminary work was documented and left the site prepared for the rescheduled appointment.

Upon completing the inspection, I meticulously filled out the home damage report, noting the minor nature of the damage. I then communicated with the customer, explaining that due to the small extent of the damage, it is likely that an internal team member will handle the repair. I assured them that we would reach out promptly to schedule a convenient time and date for the repair, ensuring minimal disruption to their daily routine. Throughout the process, I maintained a professional demeanor, providing clear and concise information to facilitate a smooth resolution.

Upon inspection, the water softener was found to be functioning correctly, with appropriate water and salt levels and the timer set accurately. After thorough testing, the system was confirmed to be operating as intended. No repairs were necessary, and the softener is now performing optimally. The customer's concerns have been addressed, and the system is back to its expected performance.