Service Areas

I began the heat pump heating tune-up by thoroughly inspecting the outdoor system. Refrigerant pressures were within the acceptable range, and I cleaned the outdoor unit to ensure optimal performance. All components were verified to be functioning correctly. To protect the outdoor control board, I recommended and installed a surge protector, which the customer approved. For the indoor system, I coordinated a duct cleaning service for the next morning. Additionally, I noticed an existing UV light and recommended an RM2 oxidation system for improved indoor air quality, which the customer also approved. After installation, I verified proper operation, replaced the air filter, inspected the drain system, and flushed the primary drain line with four gallons of water. The system was operating correctly, producing approximately 170°F air with a 21°F temperature split.

I performed a comprehensive tune-up on the system, ensuring all components were functioning optimally. The Delta was found to be in good condition, and I changed the necessary filters to enhance air quality. I tested the drainage and confirmed it was clear, which is crucial for preventing water damage. The furnace components were inspected and deemed acceptable. The refrigerant levels were also checked and found to be within acceptable limits. Electrical connections were verified to be within tolerance, ensuring safety and efficiency. I washed the units to remove any accumulated dirt and debris. The compressors were identified as overamping, and I recommended a start kit to maintain manufacturer specifications. Additionally, I advised the use of surge protectors to safeguard the system. I discussed the benefits of potential replacement versus repair, providing a thorough analysis. Upon completion, the systems were cooling effectively. Thank you for choosing our services.

During the heating tune-up, I thoroughly inspected the heat strips and heat pump, confirming that both components are in excellent working condition. To further enhance the system's efficiency and longevity, I recommended the installation of a soft start device. This addition will help extend the life of the compressor and prevent premature breakdowns. Although I offered insulation services, they were declined by the customer. Overall, the system is well-prepared for the winter season. Thank you for choosing our services, and I hope you have a great day.

During the recent heating tune-up, I began by replacing the air filter to ensure optimal airflow and efficiency. I then conducted a thorough check for oxygen levels to confirm that the system was operating safely and effectively. The blower wheel was found to be dirty, which was impacting the system's performance. I meticulously cleaned the blower wheel, which significantly improved the airflow and overall system performance. After these adjustments, the heating system is now functioning at peak efficiency, ready to provide reliable warmth throughout the winter season. Thank you for choosing our services; we are committed to ensuring your comfort and satisfaction. Have a great day.

During the service, I performed a thorough inspection and tune-up of the air handler. I discovered significant dust and biological growth inside the unit, which was causing a noticeable loss of cooling capacity. The accumulation of dirt and dust had reduced airflow, increased condensation levels, and extended system run times. I meticulously cleaned as much of the dust and dirt as I could reach, but a deep cleaning is necessary for optimal performance. I explained the situation to the customer, and they plan to discuss the deep cleaning with their spouse. Once they decide to proceed, we will schedule the additional service to restore the system to full functionality. Thank you for choosing our services.

I performed a Super Tune-Up on the heat pump system. Starting with the outdoor unit, I checked refrigerant pressures, which were slightly off the recommended range. After discussing with the customer, I adjusted the refrigerant. The outdoor fan motor was drawing excessive amperage, likely causing intermittent cycling issues during hot temperatures. I recommended replacing it and provided an estimate. I cleaned the outdoor unit before moving inside. The indoor unit showed a 21°F temperature split, indicating proper cooling. The condensate drains were flushing correctly, and the air filter was clean. The blower motor fins were dirty, but the customer declined cleaning. I recommended a duct clean and left an estimate. All other components were functioning well, and the UV bulb was operating properly. The system was cooling as intended upon departure.

I conducted a thorough evaluation of the system and successfully cleared the drain line. To enhance the system's efficiency, I installed an RM one germicidal light in the downstairs unit and an RM to oxidation germicidal lamp in the upstairs unit. These additions will help maintain cleanliness and reduce the risk of bacterial growth. Additionally, I advised the customer to pour bleach down the drain every six months to ensure optimal performance. For the initial bleach treatment, I recommended doing it every two hours, six to eight times on the same day. After completing the installation and maintenance, I tested the system to confirm that everything was functioning correctly. Thank you for choosing our services.

Today, I successfully completed a residential electrical work unit. I began by thoroughly inspecting the existing wiring and outlets to ensure everything was in proper working order. After identifying the necessary repairs, I replaced faulty outlets and corrected any wiring issues. I also tested the circuits to confirm that all electrical components were functioning correctly. Throughout the process, I maintained a clean and safe work environment. Upon completion, I provided a detailed explanation of the work performed to the customer and collected payment via credit card. The customer expressed satisfaction with the quality of work and professionalism demonstrated.

I performed a comprehensive super tune-up on the gas furnace system. Starting with the outdoor unit, I checked refrigerant pressures, inspected internal components, and cleaned the unit. I recommended a soft start, though the customer declined. Inside, I verified the air filter was in good condition and checked the temperature split, which was 21°. I flushed the condensate drain line and inspected all internal components. I suggested professional duct cleaning and provided an estimate. The UV air purification system was non-functional, so I recommended upgrading to the IAQ200 or IAQ300 system. I also presented the membership program benefits, but the customer declined. Estimates for all services were provided. The system was operating correctly upon departure.

One legger

Upon evaluation, it was clear that the upstairs system was suffering from multiple issues due to inadequate insulation. After discussing various solutions with the customer, I opted for a balanced approach, combining a middle-ground solution with the installation of two UV lights. I meticulously installed all necessary parts and cleared the drain lines. Post-installation, I conducted thorough testing to ensure the system was functioning optimally. The customer expressed immense satisfaction with the results, highlighting the restored comfort and efficiency of their system.

On 10/14/26, I conducted a comprehensive plumbing tune-up. The customer reported issues with the guest bath toilet, specifically noting occasional leaks at the tank-to-bowl connection. Additionally, both outside faucets were dripping and required replacement. I provided detailed options for the repairs. For the toilet, I recommended installing a new tank-to-bowl kit, which includes a new gasket and bolts to ensure a watertight seal. Regarding the outside faucets, I suggested replacing them with high-quality models to prevent future leaks. I scheduled a return visit for the first call on 10/16/26 to complete the necessary repairs.

Upon arrival, the customer reported slow drains, which improved after using a drain cleaner. I advised against using such products and inspected the drain lines with a camera, finding no visible damage in the cast iron pipes. One bathroom sink had a significant hair buildup and slow drainage. I highlighted this issue and recommended cleaning the trap, which the customer agreed to do. Additionally, I flushed the water heater, finding minimal debris; however, due to its age, I recommended replacement. I also suggested replacing the multi-turn stops with 1/4 turn stops and discussed options for shut-offs and a new water heater with an updated flue.

Bjjjj

I performed a comprehensive super tune-up on the gas furnace. I began by inspecting the outdoor unit, checking refrigerant pressures, washing the condenser, and ensuring internal components operated correctly. After adjustments, I confirmed pressures were within range. Noticing high startup amperage, I recommended a soft start to reduce strain on the compressor. I then inspected the furnace, measured a 17–18°F temperature difference, flushed the drain line, and verified all components functioned properly. I also suggested upgrading attic insulation for better efficiency, though the customer declined.

I successfully addressed the drain issue by thoroughly clearing the drain unit. This involved inspecting the drain for any blockages, removing debris, and ensuring the unit was free of obstructions. After the cleaning process, I tested the drain to confirm it was functioning correctly. The client appreciated the resolution and settled the payment via credit card. The job was completed efficiently, leaving the drain unit in optimal working condition.

I thoroughly inspected and serviced the entire system, ensuring all electrical components functioned correctly with no issues. Amp draws were verified to be within acceptable limits, and freon levels were confirmed to be optimal. The temperature split was precise, and all drains were meticulously cleaned and clear. The condenser was spotless, and the filter was replaced as needed. All gas safety mechanisms were tested and found to be operational. The equipment was thoroughly checked and confirmed to be working properly.

Today, I addressed a significant plumbing issue that required immediate attention. Upon arrival, I conducted a thorough inspection to identify the root cause of the blockage. Using advanced tools and techniques, I carefully cleared the obstruction, ensuring that all pipes were free from debris and functioning optimally. I also performed a comprehensive check to prevent future clogs, including cleaning and inspecting the drainage system. The job was completed efficiently, restoring full functionality to the plumbing system. My goal was to ensure the highest level of service, leaving the property with a reliable and efficient plumbing setup.

Upon inspection, the unit's freon level was found to be low, with a pressure of only 99 psi. I scheduled a refill for tomorrow. The heating gas safety checks were satisfactory, and I left the customer with options for further action. Today, I installed a new fan capacitor, which was paid for by the customer. The system is now running smoothly, and I ensured that all components were functioning correctly. The customer was informed about the next steps and any potential issues to watch for.

I conducted an electrical inspection, ensuring all systems were functioning correctly. The customer initially mistook me for the AC technician, but I clarified that the membership covers all services. The house, built in the 80s, had a clean panel with properly tightened and sized components. GFI protection, smoke detectors, and carbon monoxide detectors were installed as required. We discussed adding surge protection to the panel, but the customer opted to wait and contact us later.

On 10/14/26, I addressed an issue with the customer's original armor flex on the copper line set, which was deteriorating and causing condensation to drip onto the ceiling. After assessing the situation, I realized I needed more armor flex to complete the job. Consequently, I paused the work and will return the next day to finish the task, ensuring the issue is fully resolved.

Upon receiving a call from the homeowner, we identified that the system was experiencing issues due to a failed txz component. After discussing the symptoms and implications, we scheduled a visit for Friday to replace the faulty part. The homeowner was informed about the necessity of the replacement and the potential impact on system functionality, particularly during daylight hours. They understood the situation and agreed to cover the service fee. Our team is prepared to address the issue promptly, ensuring the system returns to optimal performance as soon as possible.

During the evaluation, I replaced the faulty transformer. Further inspection revealed a clogged primary drain line, an improperly installed secondary drain line, and a rusted secondary drain pan. Additionally, a short in the thermostat wires was identified as the cause of the transformer failure. I discussed the minimum repair options and the potential benefits of a system replacement due to the unit's age and existing issues. The homeowner opted to pay for the transformer replacement and will consider a full system replacement.

We addressed a toilet blockage in the upstairs bathroom. Our technician used an auger to attempt to clear the obstruction. This method involves inserting a flexible cable into the toilet to break up and remove the blockage. While we made every effort to resolve the issue, we want to note that there is no warranty on the effectiveness of this procedure for toilet stoppages. Our goal is to provide efficient and effective service to ensure your comfort.

During the service, I performed a comprehensive super tune-up on the heat pump system, meticulously inspecting both mechanical and electrical components to ensure maximum efficiency. I replaced the air filter and checked the refrigerant levels. Additionally, I observed significant dust accumulation and biological growth in the ducts, recommending a professional duct cleaning. A UV bulb replacement was also suggested to enhance system performance. To further protect the compressor, I recommended installing a compressor saver to reduce amps and extend its lifespan, along with a pan strip to prevent clogs. All documentation and recommendations have been sent to the customer's daughter via email. Thank you for choosing our services.