Service Areas

I conducted an electrical inspection at the residence, focusing on the main panel. The panel was in excellent condition, but I noted the absence of a surge protector, although it wasn't mandated by regulations. I also highlighted the need for Ground Fault Circuit Interrupter (GFCI) protection throughout the house, as it was not present in any area I could find. I provided detailed recommendations and emailed the customer with my findings, as they were not ready to proceed with any immediate upgrades. The inspection was thorough, and I ensured all observations and suggestions were clearly communicated.

Upon arrival, I inspected the accident unit and identified that the EMT switch was not functioning correctly. I began by thoroughly examining the switch and its connections to determine the root cause of the malfunction. After diagnosing the issue, I carefully activated the EMT switch, ensuring it was properly aligned and securely connected. Following this, I conducted a series of tests to confirm that the switch was operating as intended. The unit responded correctly to the switch activation, indicating that the problem had been successfully resolved. I completed the job by cleaning up the work area and providing a detailed report of the work performed.

I successfully completed a comprehensive inspection and maintenance of the HVAC system. All electrical components were thoroughly checked and found to be functioning properly, with appropriate amperage draws. The freon levels were verified to be within the optimal range, and the temperature split was satisfactory. Drains were cleaned and found to be clear, ensuring efficient water removal. The condenser was meticulously cleaned, and the filter was replaced with a new one. Additionally, the heat function was tested and confirmed to be working correctly. A UV light bulb was installed to enhance system efficiency and longevity.

I thoroughly inspected and tested all electrical components, ensuring they were functioning properly. The amperage draws were within acceptable limits, and the freon levels were balanced. The temperature split was optimal, and the system's drains were clean and clear. The condenser was meticulously cleaned, and the filter was replaced. All electrical components for heating were tested and working correctly. The unit was fully operational. Additionally, I installed an affordable UV system to enhance system efficiency and cleanliness. I also removed biological growth from the system to ensure optimal performance. Payment was collected via credit card.

Jcjcjci

I conducted a comprehensive super tuneup on the HVAC system. This involved addressing excessive biological growth within both supply plenums, which was identified as a potential issue. Although the customer plans to handle this growth separately, I ensured the system was prepared for future remediation. Additionally, I replaced the capacitor in the older system to enhance its efficiency and reliability. The overall performance of the HVAC system was improved, and I provided recommendations for maintaining optimal operation.

On November 4, I arrived to complete the scheduled service. Upon arrival, I found that the customer was unaware of my visit today. They requested that we reschedule the job to a more convenient time. I confirmed the new appointment date and time with the customer, ensuring they were fully informed and comfortable with the revised schedule. The customer appreciated the flexibility and we agreed to proceed with the rescheduled date. The job involved a comprehensive inspection and maintenance of the home's HVAC system, including checking the air filters, cleaning the vents, and ensuring all components were functioning properly.

Today, I completed a service for a customer whose father is funding the unit. We discussed the details over the phone, and I provided a comprehensive overview of the work performed. This included a thorough inspection, identification of necessary repairs, and an explanation of the proposed solutions. I ensured that all aspects of the service were clearly communicated to the customer and her father. He is currently reviewing the information and will provide a decision tomorrow. I am confident in the quality of the work and look forward to his feedback.

Upon inspection, it was determined that the hydrant near the entrance requires replacement. Both hydrants were examined, with the one at the rear proving functional. The front hydrant's vacuum breaker was found to be defective. To address this, the faulty front hydrant was carefully removed and replaced with a new frost-free hydrant. The new installation ensures reliable performance and protection against freezing temperatures. The area was tidied, and all tools were properly stored. The job was completed efficiently, ensuring the hydrant is now fully operational.

On 11/2/26, I evaluated a heat pump system that was leaking water and not cooling. Upon inspection, the blower motor was not running, and the system was freezing, causing water leakage. The customer has parts and labor warranty, so I ordered an x-13 blower motor. After the part arrived, I replaced the faulty blower motor and ensured the system was cooling properly before leaving. Additionally, I explained the benefits of our new membership, which the customer opted into. Thank you for choosing Comfort Experts.

I successfully replaced the indoor unit coil and recharged the system for Alex D. After completing the installation, I set the system to cooling mode and monitored the temperature differential. The system maintained a stable temperature difference of 18 degrees, ensuring optimal performance. I verified that the system was functioning correctly and provided Alex with a detailed explanation of the work performed and the expected outcomes.

I conducted a comprehensive system evaluation and presented the customer with options to address the existing issues. They opted to proceed with the necessary repairs promptly. I installed an R2 drum recital oxidation system in the air handler and a soft start for the outdoor condenser. The customer chose to finance the soft start, which was already installed, along with the insulation and duct clean. I am scheduled to return this Friday at 9 a.m. to perform an insulation blow-in and a level one duct clean, ensuring the system operates efficiently and effectively.

I responded to a call regarding a disposal switch issue, as arranged by Adam. Upon arrival, I successfully installed a new switch, ensuring it functioned correctly. The customer was pleased with the resolution. Additionally, the customer requested an inspection of their spigots, which I scheduled for later today. If the plumber cannot make it today, the customer is available tomorrow.

Upon arrival, I began with a comprehensive inspection of the indoor gas furnace system, examining all internal components. I identified a likely restriction in the evaporator coil due to biological growth and informed the customer. They opted for a Level 2 duct cleaning to address accumulated dust, debris, and biological growth. Additionally, they approved a home insulation upgrade scheduled for November 23rd. I verified proper operation of all internal components, ensuring a temperature split of at least 15°F. I flushed approximately two gallons of water through the primary drain line to maintain proper flow and drainage. Moving to the outdoor unit, I thoroughly rinsed the equipment and checked refrigerant pressures, confirming they were within the manufacturer's acceptable range. I discovered a capacitor outside its acceptable tolerance and recommended its replacement, which the customer agreed to. Although I suggested installing a soft start to reduce compressor startup stress, the

Upon arrival, I diagnosed the issue with the customer's system, which was not operating correctly. The fan side capacitor was found to be faulty, preventing the fan from starting properly. Additionally, the fan was running in reverse. I informed the homeowner that if further repairs are needed, there will be an additional service charge. I also explained that any additional damage to the system would be the homeowner's responsibility. The homeowner mentioned a friend who might provide parts at a lower cost, but I emphasized the importance of using quality parts for proper system function. I left the system running in reverse for further evaluation.

No answer

During the service, I thoroughly cleaned the condenser unit but noted that the filter had not been changed. The temperature differential (Delta) in cooling was measured at 18 degrees, indicating a need for improved efficiency. Additionally, the compressor was overamping significantly, which I recommended addressing with a soft start installation. The drain appeared to be on the verge of clogging, so I suggested a drain clear to prevent potential water damage. The condenser fan motor showed signs of rusting powder coat, prompting a recommendation for a proactive replacement to avoid future breakdowns. The contactor was also buzzing, a clear sign that it may soon fail. The customer is aware of these issues and will consider the recommendations before proceeding with any repairs, especially given the age of the system. Thank you for choosing our services. Have a great day.

I successfully installed a new garbage disposer, ensuring it was securely connected to the existing plumbing system. Additionally, I repiped the drain under the kitchen sink to address any potential leaks or blockages. To enhance functionality, I ran a cable through the drain, enabling the system to clear debris more effectively. After completing the installation and repiping, I conducted thorough testing to confirm that everything was functioning properly. The new garbage disposer operates smoothly, and the repiped drain is free from leaks. The cable system ensures efficient clearing of debris, providing a reliable solution for future use.

During the service, I performed a comprehensive tune-up, including changing the filter and ensuring the drain was clear. The heating elements were found to be acceptable. I addressed biogrowth with a premium duct clean, which includes anti-microbial treatment and thorough cleaning of the air handler. The system's refrigerant levels were acceptable, and electrical components were within tolerance. I also recommended a soft starter or surge protector for added benefits. Both indoor and outdoor units were washed, and I discussed the advantages of our Comfort Club membership.

Upon arrival, I found the blower motor was not operational. I began by opening the unit to inspect the electrical connections. I verified the presence of both 24 volts and 120 volts at the blower, confirming that the electrical supply was intact. After conducting a thorough examination, I diagnosed the issue as a faulty blower motor. I informed the customer that a replacement motor needed to be ordered and assured her that we would contact her once the part was in stock. Today, 30% of the payment was completed, with the remaining balance due upon job completion. Thank you for choosing our services; we appreciate your trust in us. Have a great day!

Upon inspection, I identified a gas leak originating from the stove connection. The leak was traced to a compromised connection point, which posed a significant safety risk. I explained the potential hazards and recommended immediate repair. However, the customer opted to handle the repair themselves. I provided detailed guidance on the necessary steps, including shutting off the gas supply, inspecting the connection for damage, and ensuring proper sealing. I also emphasized the importance of safety precautions and the need for professional assistance if they felt uncertain.

During the evaluation, we identified a tripped wet switch caused by a clog in the primary drain line. We successfully unclogged and treated the drain line. Following this, we verified that the refrigerant levels were within normal parameters. Additionally, I discussed the benefits of installing a soft start on the second unit with the homeowner, who expressed interest in scheduling this service in the future. Thank you for choosing our services.

Upon arrival, I identified an issue with the absence of hot water. Upon inspection, I discovered that the flood stop valve had been inadvertently turned off. I informed the homeowner of this finding and advised them to replace the batteries to restore water flow. Additionally, I noted that there seemed to be a mixing issue with the water within the system. I emphasized that there was no warranty coverage for the water heater, flood stop, or crossover components.

We recently engaged with a homeowner regarding the reinstallation of a soft starter. After a thorough discussion, it was determined that the homeowner plans to move soon, which led to the decision to postpone the reinstallation. Our team provided detailed insights into the benefits and necessity of the soft starter, ensuring the homeowner understood the importance of the task. We also discussed potential timelines and offered flexible scheduling options to accommodate their future plans. Our commitment to customer satisfaction and clear communication was evident throughout the interaction, reinforcing our dedication to providing top-notch service. We appreciate the homeowner's trust in our expertise and look forward to assisting them in the future. Thank you for choosing us for your service needs.

Upon arrival, I assessed the toilet and identified that the flapper was the source of the issue. I carefully removed the old flapper, ensuring no damage to the tank components. I then installed a new flapper, making sure it was properly aligned and securely attached. After testing the flush, I confirmed that the toilet was functioning correctly, with no leaks or residual water in the bowl. The customer was pleased with the resolution, and no further action was required.