Same-Day AC Repair in Kennedale, TX

During the service, I conducted a comprehensive evaluation and provided a free second opinion on the potential failure of the ECM blower motor. I explained the implications of this issue and the necessity for replacement. The customer now has 10 days to decide on the repair. Additionally, if they sign up for our membership, they will receive a 20% discount on the total cost of the job. This thorough assessment ensures the customer is well-informed and can make an educated decision regarding the repair.

During the service, I conducted a thorough evaluation of the HVAC system. The indoor unit was operational, but the outdoor unit was not functioning. Upon inspection, I found the outdoor unit to be dirty and the refrigerant level slightly low. Additionally, the insulation was inadequate, which could be contributing to the system's inefficiency. I discussed the pros and cons of repairing versus replacing the unit with the homeowner. They expressed interest in exploring mini-split options, so I offered to arrange a consultation with a Comfort Advisor. For now, the homeowner requested that I add freon and monitor the system. The system was cooling effectively when I left.

Shop work cleaned.

I arrived on-site to perform a scheduled maintenance task. Upon arrival, I was informed that the homeowner was not present. Instead, her ex-husband was there, but he did not have ownership of the property. Despite this, I proceeded with the work, ensuring all tasks were completed to the homeowner's specifications. I meticulously inspected the area, carried out the necessary repairs, and ensured everything was left in a clean and orderly condition. Throughout the process, I maintained professionalism and respect for the property, ensuring the work was done efficiently and effectively.

Upon inspection, the blower motor was found to be non-functional due to a stuck component, preventing it from spinning. The wheel and motor were both identified as needing replacement. This is a r22 system, which requires specific components for proper functioning. After evaluating the situation, it was determined that repairing the current system would not be cost-effective. Instead, a complete system replacement is recommended. The customer has agreed to discuss this option further upon their return on Sunday, the 19th, at 10 am.

I installed a 36 Hz gas keep current filtration system, ensuring optimal air quality and energy efficiency. This involved precise installation of the filtration components, adhering to all relevant codes. Additionally, I thoroughly cleaned the ductwork to remove any accumulated debris, enhancing system performance. The project included a comprehensive code kit to ensure compliance with safety standards. The result is a cleaner, healthier indoor environment.

I addressed an issue with a GFCI tripping intermittently, occurring every few weeks for no apparent reason. The customer noted it even happened when it was hot outside. After examining the circuit, I found no significant issues with the connections. I informed the customer that Samsung fridges can sometimes cause GFCIs to trip and suggested moving the fridge to another GFCI to determine if it's the source of the problem. I advised the customer to call us back for further assistance, whether it requires a GFCI replacement or an appliance specialist.

Upon arriving, I conducted a thorough inspection of the customer's appliance, identifying the necessary repairs. I explained the potential issues and the recommended solutions, providing a detailed estimate of the repair costs. After discussing the options, the customer reviewed the proposed expenses. Unfortunately, the customer informed me that they did not have sufficient funds to cover the repair costs. I offered alternative solutions and budget-friendly options, but ultimately, the customer declined all further services due to financial constraints. I ensured the customer understood the implications of not addressing the issues and left the premises professionally.

I performed comprehensive cooling tune-ups on two DC inverted units, meticulously inspecting both mechanical and electrical components to ensure optimal efficiency. I replaced the air filters and verified that refrigerant levels were within the ideal range. Additionally, I recommended installing drain switch and pan strips to prevent future issues, although the homeowner informed me that she plans to sell the property. My thorough approach guarantees that the systems are in top condition, providing peace of mind to the homeowner. Thank you for choosing our services.

I thoroughly inspected and tested all electrical components, confirming they were functioning properly with good amperage draws. The refrigerant levels were verified to be adequate, and the temperature split was within acceptable parameters. Drains were clear, and the condenser was clean. The air filter was in good condition, and the evaporator coil was inspected, though it was found to be dirty. The blower wheel also required cleaning. I left detailed estimates for the necessary maintenance and cleaning tasks.

During the visit, I thoroughly inspected both sides of the system, noting that it operates with a 5-stage heating and 11-stage cooling process. I identified several issues, including a malfunctioning float switch that was out of the drain and an emergency pan filled with water. Despite these problems, the client expressed a preference to manage the repairs independently. I provided detailed explanations and guidance on the issues identified.

Upon arrival, I inspected the upstairs unit condenser and identified a faulty dual run capacitor as the root cause of its malfunction. After confirming the diagnosis, I replaced the defective capacitor with a new one. Following the replacement, the condenser functioned correctly, and the unit resumed proper operation. Additionally, I enrolled the customer in the Comfort Care Club for the upstairs unit, ensuring ongoing maintenance and support. Payment for the service and the monthly processing fee for the Comfort Care Club was collected via credit card, which will be used for future charges.

Upon inspection, the tankless water heater exhibited a persistent leak at the inlet, accompanied by a code 11 on the controller when in use. Despite the unit being 13 years old and out of warranty, I verified the incoming gas pressure and ignitors, which were functioning correctly. After unplugging and resetting the heater, it operated properly, but the issue recurred shortly. Given the age and history of the unit, I recommended replacing the tankless heater. I also provided a quote for replacing the water filter, noting that it had been replaced multiple times but continued to leak.

I successfully installed a new warranty evaporator coil unit, ensuring all connections were secure and tested for optimal performance. The system was thoroughly inspected to confirm proper functionality. The unit is now operating efficiently, providing enhanced cooling performance. All components were cleaned and inspected, and the system was tested for leaks and balanced for optimal airflow.

Upon arrival, I conducted a thorough evaluation of the indoor and outdoor units. The indoor unit was operational, while the outdoor unit had locked out and was overheating. Both units were heavily caked in mud, so I proceeded to clean them thoroughly. I washed the coils and reset the unit's code. After these steps, the unit started cooling effectively with no further issues. I also changed the filters to ensure optimal performance. During my visit, I highlighted the benefits of the Comfort Club, emphasizing its advantages. By the time I left, the system was cooling efficiently.

I replaced a failed outdoor capacitor, restoring proper cooling. The outdoor unit was cleaned to ensure optimal airflow and prevent overheating. I tested the system to confirm it was functioning correctly. Additionally, I recommended installing a start kit on the outdoor unit to reduce the compressor's amp draw. No further work was required at this time. The system is now cooling effectively.

I recently completed a comprehensive gas installation project for a customer. After a thorough assessment, I provided a detailed quote of 36k for the work required. The customer was keen on getting his bonus a week early to fund the project. We discussed various options, including level 4 and level 5 installations, to ensure the best fit for his needs. Throughout the process, I maintained open communication with the customer, pausing the job temporarily to allow him to finalize his bonus arrangements. Once the funding was secured, we resumed the project, ensuring all work was completed to the highest standards. The customer was very satisfied with the results, highlighting the importance of clear communication and flexibility in meeting client needs.

Upon inspection, it was discovered that the issue was not related to an outdoor TXV as initially thought. Instead, the unit was low on refrigerant, and a leak was found at the evaporator coil. The coil is under warranty, and all relevant information is documented in the parts section. The remaining balance will be collected upon job completion.

I conducted a thorough evaluation of both systems, finding issues with thermostat satisfaction. The downstairs system showed no temperature change, while the upstairs system had a 10-degree difference. I replaced the filters, ensured the drains were clear, and tightened electrical components within tolerance. Safety mechanisms were checked, and refrigerant levels were found to be low with signs of previous leak attempts. I diagnosed the need for coil replacement and refrigerant refill on both units, along with a metering device replacement for the downstairs unit. Scheduled a comfort advisor for Friday and an electrician for the garage outlet. Systems were operational when I departed.

Upon evaluation, the unit was operational but not meeting thermostat settings. The temperature difference (delta) was approximately 5 degrees, and the superheat was around 50. After thorough inspection, the issue was identified as a failed metering device and a clogged filter drier. The homeowner opted for the Home & Business plan, and I ordered the necessary replacement parts. I will return to complete the repair once the parts arrive.

I thoroughly inspected and serviced both electrical components, ensuring all amp draws were within acceptable limits. The freon levels were verified and topped off as needed. Temperature splits were optimal, and all drains were cleaned and clear. The condenser was meticulously cleaned, and the filter was replaced. Gas safety checks were conducted, and all equipment was confirmed to be functioning properly. Payment was collected via credit card.

I addressed a recurring issue with two interconnected drain lines that were frequently clogging. The customer had previously considered installing a ball valve to manage the problem, but the cost was too high. Instead, I thoroughly cleared both drain lines to ensure smooth operation. After the work, I tested the system to confirm that it was functioning correctly. The customer was satisfied with the solution, and the system was left running efficiently. Thank you for choosing our services.

Customer has to leave to go to a wedding reviewed many options they will be discussing to let me know could not finish the meeting customer had to leave

Emailed customer a quote for a level 3 60 k gas system.

What time do you job for electrical inspection and house is only 3 years old and everything looks really good has all GFCI and afci breakers as well as search protection and everything is in really good shape has disconnect on the outside and meter base that all look in really good shape still took it looked throughout the house had you five protection where it was needed every plug was working every light switch customer did want to put a fan up in the bedroom and swap it out so gave price to do that and did it while I was there in customer super happy with everything