HVAC, Plumbing, & Electrical Services in Hudson Oaks, TX

Emailed estimate to remove solar panels and re-install. After roof is replaced. If tech comes out for a tube up. Please bring comb to straighten fins on window unit. Per Brian.

Arrived to no cool on smaller primary bedroom system. Goodman 2 ton heat pump installed in 2019. Resting pressures are at 22 psi. Performed leak search. Found leak in bottom side of evaporator coil. Suggest replacing the system due to the current system having no warranties. Comfort advisor is scheduled to meet with the customer in Monday afternoon.

We will replace 3 hose bibbs around home 6/3/25 wg Returned and replaced 3 threaded outside faucets around home. No leaks at this time. 1 yr warrant y

2020 2.5t attic horizontal hp foam insulation. System down upon arrival. Diagnostic discovered failed 35/5 dual run capacitor. Replaced. System cooling. Homeowner is moving within a year and declined membership benefits. System cooling upon departure with tstat set to 74° per homeowner. 88° ambient.

When technician arrived the AC downstairs was not working thermostat was blank. Technician went to attic and found plugged drain, found the drain lines run into masterbath sink so I removed that and found plugged line going into the sink so I cleared the plugged line re installed the flex hose and water drained through it. Technician got some bleach water from homeowner and flushed both attic systems. Then technician checked coils, blower wheel, temperature splits, refrigerant pressures including superheat and subcool, checked capacitors and contactor, and washed outdoor coil. 70/5 capacitor tested at 68.4 and 5 and contactor starting to pit will quote to customer. Homeowner asked for technician to install the new contactor and dual run capacitor so I replaced and tested. Unit is good to go

Customer only wanted estimate to replace 3 outside faucets. He declined tune up. No repairs done today

2016 3t Lennox hp attic horizontal. Homeowner was not home upon arrival, waited appropriately. Recieved permission from homeowner through dispatch to look at the condenser unit. System off upon arrival. Once homeowner arrived. I accessed the indoor unit and quickly found the SAFTEY drain switch had been activated on the secondary line. I cleared the drain blockage, monitored refrigerant system. Fully functional and cooling upon departure. I expressed concerns about maintenance but homeowner declined membership. Homeowner also claimed the system hasn't been on for a month. Homeowner purchased a drain clear.

Installed customer provided water softener flushed out entire fresh water system changed fill valve in guest toilet flush3d water heaters and changed out boiler drain on water heater

5/12/25 Customer said we where not supposed to be out until this evening they have an appointment they are going to will return later today

Upon arrival tech talked with home owner and started with the super time up tech Started with the air handler tech found that the system is running the way that is meant to tech did find that the system is starting to have biological growth grow in the system All electrical connections are tight and have no corrosion on them at this time Tech moved to the condenser where tech got a high inrush amo draw Tech washed and waxed the system Tech talked to home owner about findings

5/6/25 Customer would like to reschedule due to the rain. Customer would like to reschedule for next month.

Installed wwsp. Emailed estimates. New member. CUSTOMER WOULD LIKE TO HAVE AN HVAC TECH OUTTO DIGNOSE AC SYTEM NEXT WEEK MONDAY- WEDNESDAY. 5/5-5/7. PLEASE CONTACT CUSTOMER TO SCHEDULE APOINTMENT.

Super tune up performed today on a 5 year old Lennox straight electric system. 45/10 auxiliary motor start is showing as weak and is out of manufacture tolerance. This needs to be replaced. System does not have any drain protection. Compressor and condenser fan motor are acceptable. Refrigerant levels are in range. Outdoor unit was washed and waxed. Customer declined repairs at this time.

Replace frost free hydrant on back corner of home. Faucet broke in wall while removing. Was able to remove faucet without removing brick or drywall. Customer was not interested in membership at this time

Confirmed leak in the condenser coil. Because of the location of the leak replacement of condenser coil is highly suggested. Emailed estimate to the customer.

2024 Revolv Airhandler Checked and tightened all electrical connections Changed Customer provided filter Drain was clear and draining Blower motor and wheel were acceptable Evaporator coil has slight dust and biological growth build up 2024 Ducane Straight Cool Checked and tightened all electrical connections Dual run capacitor was within manufacture range Primary electrical unit was acceptable Refrigerant levels were acceptable at this time Fan blades and motor were acceptable Condenser coil was acceptable Washed Condenser coil from inside out Cleared debris out of unit Waxed top of unit Recommended Uv system, anti microbial pan treatment and compressor saver

Install 48k upflow heat pump keep current filtration includes code kit

Level 4 heat pump 48000 btu

Upon arrival tech bound capacitor blown technician also found low refrigerant Technician found lake and evaporated coil.Technician is having jimmy go out at 2

Super tune up performed today on a Coleman heat pump with air handler installed in 2017. All electrical connections are tight with no corrosion. X-13 blower motor is acceptable. Heat strips are pulling proper amperage. Blower wheel and evaporator coil are clean. Compressor and condenser fan motor are acceptable. Refrigerant levels are in range. Outdoor unit was washed and waxed.

Upon arrival tech started at the airhandler tech found everything that everything was working perfectly fine tech did Recommend a pan strip to help with build up in summer time. Tech moved to the condenser where tech found that the compressor is having high inrush amps. Tech does recommend a compressor saver.

Tech started with the airhandler where tech found everything to be working properly tech did find that the drain line is starting to have build up tech moved to the condenser where tech found the inrush amps were high tech found everything else to be up to standards

Quoted a level 2 and 3 18k mini-split and a level 2 and 3 24k mini-split

Super tune up performed today on a carrier heat pump with air handler installed in 2020. All electrical connections are tight with no corrosion. Heat strips are pulling proper amperage. X13 blower motor is acceptable. Blower wheel and evaporator coil are clean. Compressor and condenser fan motor are acceptable. Refrigerant levels are in range. Outdoor unit was washed and waxed. Highly suggest adding a compressor saver to the outdoor unit to help with the efficiency and reliability of the system upon start up.

Blower motor failure – replaced with psc motor and added a relay, system is functional.