Service Areas

I visited to provide quotes for permanent outdoor lighting. After assessing the perimeter, I measured a total of 117 feet around the house. I presented the customer with detailed quotes, explaining the various options available for enhancing their outdoor lighting. The customer expressed interest but needed to discuss the options with his wife. To ensure he had all the necessary information, I emailed him a comprehensive leap form that included the quotes, lighting designs, and installation details. This allowed him to review the options at his convenience and make an informed decision.

Upon arriving at the service location, I confirmed that it was indeed on the Titan system. However, I found that there was no unit 5500 present on the block. I attempted to contact the customer using the phone number and text provided, but received no response. I then contacted dispatch and spoke with Autumn, who advised me to document the situation in the job notes and pause the job until further instructions were given. Autumn suggested that dispatch would handle reaching out to the customer to resolve the issue. I followed the instructions and paused the job, ensuring all relevant details were recorded in the notes for future reference.

I conducted an electrical inspection and addressed issues with non-functioning lights and a kitchen fixture. After assessing the situation, I provided a detailed quote. I then sourced the necessary ballast, replaced it, and successfully restored functionality to the affected areas. The customer was satisfied with the quick and efficient resolution.

I visited the property to provide a comprehensive quote for enhancing the exterior lighting around the house. During the consultation, I presented eight distinct options to the customer, ranging from scenarios where they would supply the lights to instances where we would provide them. Additionally, I explained the benefits of our membership program. The customer expressed interest and indicated that they would contact us once they decided on the preferred option. This interaction ensured that the customer had all the necessary information to make an informed decision regarding their lighting needs.

I made several adjustments to the attic ladder to ensure it operates smoothly and safely. First, I inspected the ladder mechanism to identify any worn or damaged parts. I replaced the worn hinges and lubricated the moving parts to reduce friction and noise. Next, I checked the ladder's stability by reinforcing the mounting brackets and ensuring they were securely fastened to the ceiling. I also inspected the ladder's rungs for any signs of wear and replaced any that were compromised. Finally, I tested the ladder to confirm that it opens and closes without obstruction and that it locks securely in both the open and closed positions. The office will need to contact you to arrange payment for the service.

Upon arrival, I inspected the smoke detector that was reported to be malfunctioning. After a thorough examination, I identified that the issue was due to a loose connection within the device. I carefully re-secured the connection, ensuring all components were properly aligned and functioning. Additionally, I tested the detector to confirm it was operating correctly. I explained to the customer that if the detector fails to work again without any apparent reason, they should contact us for further assistance. This proactive approach ensures their safety and peace of mind.

I conducted a comprehensive super tuneup, ensuring all mechanical aspects of the customers' tire system were in optimal condition. Upon inspection, I discovered excessive biological growth within the supply Plenum. After discussing the issue with the homeowner, we agreed on installing a germicidal lamp to eliminate the growth and prevent its recurrence. Post-installation, I meticulously tested the entire system to confirm its proper functioning. Thank you for selecting our services.

We assessed the need to dig up the water line in the yard to locate a suitable section for capping. Upon finding a good piece of pipe, we successfully capped it and removed the line to the back of the property. The hole was backfilled, and the water supply was restored. No additional leaks were detected, ensuring everything is functioning properly. The job was completed efficiently, maintaining the integrity of the water system.

a soft start device or a compressor saver. The homeowner opted for the soft start device and requested its installation in mid-March. I scheduled a follow-up call for March to finalize the installation date and ensure everything is set. Thank you for choosing our services. Have a great day!

Upon inspection, the fan system was underperforming due to a disconnected wire at the cap. Additionally, the contactor showed burn marks, indicating a high inrush current of 112 amps at startup. To address this, I reconnected the wire and recommended implementing a soft start mechanism. This change is expected to reduce the inrush current by up to 75%, enhancing system efficiency and longevity.

On 11/10/26, I completed a scheduled task involving the pressure tank. The primary objective was to ensure the pressure tank was functioning correctly and to perform any necessary repairs. Upon arrival, I inspected the pressure tank and identified the required adjustments. I then proceeded to make the necessary repairs, ensuring all components were operating efficiently. Despite the completion of the work, the customer was not present to provide the final signatures. I left detailed instructions and contact information for the customer to review the work and sign off when convenient.

I assessed the area to locate a suitable section of the water line for disconnection. After careful examination, I found a good piece of pipe that could be cut and capped, ensuring the line to the back of the property is permanently disabled. The process involved precise digging and pipe handling to avoid any damage. If no suitable pipe was found, additional work would have been required, potentially increasing the cost. The entire job was completed efficiently within three hours.

Upon inspection, the primary drain was found to be obstructed, preventing proper drainage. After thorough examination, the drain unit was successfully cleared, restoring functionality. The lead for the plumber was set, ensuring efficient water flow. However, the main drain under the sink, which originates from the air conditioning system and connects to the p-trap, was improperly installed, causing water to flow uphill. This issue necessitates a redesign to ensure optimal drainage and prevent future clogs.

Today, I thoroughly tested the system in both cooling and heating modes. The system performed within the specified tolerances throughout the entire process. A notable observation was the high inrush current, which I recommend addressing by implementing soft start mechanisms for all three systems. This is an important consideration for the new system as well. Additionally, I installed two IAQ200 systems and meticulously cleaned the bio growth. The systems have been washed, and the filters are now clean, ensuring optimal performance and air quality.

I successfully completed a comprehensive inspection and maintenance of the electrical components, ensuring all amperage draws were within acceptable limits. The refrigerant levels were verified to be optimal, and the temperature split was found to be within the recommended range. Drains were thoroughly cleaned and found to be clear, while the condenser was inspected and cleaned to ensure efficient operation. The air filter was replaced, and all gas safety mechanisms were checked and confirmed to be functioning correctly. The equipment was tested and found to be operating properly, ensuring optimal performance and safety.

excessive biological growth in the supply Plenum. Using a scope camera, I demonstrated this to the customer and their family. To address this, I installed a germicidal antibacterial lamp. The customer approved the additional service over the phone, and I left the warranty sheet for their records. Thank you for choosing our services.

Upon arrival, I assessed the customer's garbage disposer, which was experiencing significant clogging or jamming issues. I began by carefully inspecting the unit to identify the source of the problem. Using specialized tools, I safely removed the obstruction, ensuring no damage was done to the disposer. After clearing the blockage, I conducted a thorough cleaning of the unit to remove any residual debris. I then tested the disposer to confirm that it was functioning correctly. The customer was pleased with the results, and the disposer is now operating smoothly without any further issues.

I inspected the system and cleaned the condenser, replacing the filter. The TXV is malfunctioning, and a start kit is needed. The float switch is missing, and the ductwork is unbalanced with high negative pressure. The capacitor is out of tolerance, and bio growth in the plenum requires UV light. A plumber is needed for scheduling. Thank you for choosing us.

I replaced both frostproofs, ensuring they were securely installed and tested for proper function. The kitchen faucet was carefully removed and a new one installed, followed by replacing the garbage disposal and testing it to confirm it was working correctly. After completing these repairs, I conducted a thorough inspection to ensure everything was functioning properly. The customer will schedule a future appointment for the tub spout replacement.

Redoing whole box

I performed a comprehensive super tune-up on the heat pump system, meticulously inspecting all mechanical and electrical components for optimal efficiency. The filter was identified as needing replacement soon. The outside condenser was thoroughly cleaned. Post-service, the system was confirmed to be cooling effectively at the exit. Thank you for choosing our services.

During the recent tune-up, I thoroughly inspected the system and found it to be functioning well, with the compressor pulling the same amount of amp as during the previous visit. However, I noticed significant biological growth within the air handler, which poses a health risk due to the presence of potentially harmful bacteria. This growth not only compromises the air quality but also restricts airflow by accumulating on the coil fins. To address this issue, I recommended installing a germicidal UV light to eliminate the bacteria and improve indoor air quality. The homeowner will discuss this with her husband and take necessary action soon. I will follow up with a call tomorrow to ensure everything is resolved. Thank you for choosing our services.

During the service, I guided the homeowner through the proper use of their thermostat, ensuring they understood the differences between various settings. I explained that selecting the Auto mode allows for a 4° temperature split, which helps maintain a comfortable environment by automatically switching between heating and cooling. For cooling, the unit activates only when the temperature exceeds the set point, while heating operates when the temperature falls below it. I also provided detailed instructions on how to choose these settings. Additionally, the homeowner requested information on the appropriate air filters for their unit, which I noted as 210 April air filters. Thank you for choosing our services.

On Wednesday, I inspected the gas line system to identify necessary repairs. The work involved replacing a section of the gas line that showed signs of wear and corrosion. I carefully disconnected the old line, measured and cut the new section, and securely connected it using appropriate fittings. Safety checks were conducted to ensure the integrity of the connections. The job was completed efficiently, and I scheduled a follow-up visit for Thursday to verify the system's functionality and address any potential issues.

On November 4, I conducted a thorough quality check at a residence. I identified several areas requiring attention. Firstly, the paint adjacent to the closet door showed signs of staining from PVC glue, necessitating a clean-up and repainting. Secondly, the door trim exhibited noticeable scuffs and marring, which would need to be sanded and repainted to restore its appearance. Additionally, the return grille was found to be misaligned and required straightening to ensure proper function and aesthetics. I will gather the necessary materials and plan to have Jani return on Monday the 9th to address these issues.