HVAC, Plumbing, & Electrical Services in Benbrook, TX

During the service, I performed a comprehensive tune-up. The Delta was found to be in good condition, and I changed the filter. The heat strip amp draw was verified to be within acceptable limits. I also tightened all electrical components and ensured the drain was clear. The refrigerant levels were fine, but the start kit had failed. I recommended upgrading to a soft starter for improved reliability and efficiency. Additionally, I advised on the benefits of surge protection and discussed the Comfort Club. I replaced the hard starter under the Power-on-Load (PnL) and provided time for consideration of additional options. The system was turned off before I left. Thank you for choosing our services.

On Wednesday the 21st, I returned to meticulously install a new return grille. The task involved cutting into a 16-inch duct to ensure a precise fit. I carefully measured and marked the area before cutting, ensuring minimal disruption. After the cut, I installed a 20×20 grille, securing it firmly to maintain optimal airflow. The grille was chosen for its durability and aesthetic appeal, blending seamlessly with the existing decor. The final result was a clean, professional installation that enhanced the overall efficiency and appearance of the system.

I performed a comprehensive super tune-up on the heat pump system, meticulously inspecting all mechanical and electrical components to ensure maximum efficiency. I replaced the air filter, checked and balanced refrigerant levels, and thoroughly tested the drain lines for proper function. Additionally, I sent an estimate for duct cleaning to the customer. I recommended installing a compressor saver to reduce start-up amps on the compressor and replacing the UV bulb to enhance system performance. The customer was unavailable due to his work as a trucker, so estimates were sent to him directly. Thank you for choosing our services. Have a great day!

We completed a comprehensive super tuneup for the customer's system. This included replacing the hard start kit to ensure optimal performance. During the inspection, we identified a failed thermal expansion valve (TXV) and significant biological growth within the air handler. Although the customer, Gosper, chose not to address these issues immediately, we informed them of the potential future complications. Our team provided professional advice and completed the tasks within our scope to maintain system efficiency. Thank you for choosing our services.

This estimate covers the replacement of a hose bib. Access was gained by cutting a hole in the sheetrock, which was not replaced. The drop ear 90 was cut and properly remounted to ensure the hose bib's warranty remains valid. The work was completed, and the drywall was reinstalled. The customer will handle taping and mudding. No leaks were detected, and the customer expressed satisfaction with the completed work.

I inspected the heating system and identified that the refrigerant levels were low. After a thorough evaluation, I added a leak-stop solution to address any potential leaks and topped off the refrigerant to the appropriate level. The system now maintains a stable 20° temperature split, ensuring optimal performance. I explained the process and the benefits of the leak-stop solution to the customer, who appreciated the detailed service. The system is now fully functional and efficient, providing the comfort expected. Thank you for choosing our expertise.

Upon receiving a recall request from the customer, I promptly returned to address their concern regarding a slight noise coming from the fan. Upon inspection, I identified the source of the noise and successfully resolved the issue. The customer was pleased with the outcome and expressed satisfaction with the repair. Additionally, they mentioned a potential future request to replace the fan's housing unit. I ensured that all work was completed to their satisfaction and left the premises clean and tidy. I am available for any further assistance they may need in the future.

I visited the customer's residence to assess various tasks. They wanted to install fans provided by them, which they preferred to handle themselves. Additionally, I examined their oven, which was sparking due to an internal issue. After inspection, it was clear the oven was too old and needed replacement. I explained the situation to the customer, who decided to purchase a new one. I offered to install the new oven once it arrives.

Upon arrival, I assessed a leaking outside hose bib. I provided a detailed estimate for the repair, explaining the necessary steps and materials. The customer expressed interest in comparing prices from various companies. Despite my offer to complete the repair immediately, the customer opted to delay the work. I ensured the area was left clean and safe, and I provided clear instructions for temporary measures to mitigate the leak until a decision is made.

Ggghb

A comfort advisor was dispatched to address an issue with the HVAC system. The problem was identified as a failed blower motor and primary control board, resulting from excessive water exposure while the system was operational. The advisor scheduled a visit for 6 PM tomorrow to diagnose and resolve the issue, ensuring the system operates efficiently and safely.

I performed a comprehensive inspection and maintenance of the heating and cooling system. I checked all electrical components and confirmed they were functioning properly with appropriate amperage draws. Gas safety mechanisms were verified to be in good working order. The equipment was tested and found to be operating efficiently. I also measured the temperature split, which was within acceptable parameters. Additionally, I inspected and replaced the air filter, ensuring optimal airflow and system performance. All aspects of the system were reviewed to ensure it was running smoothly and efficiently.

On September 25, I attempted to contact the homeowner to discuss the scheduled service. Unfortunately, there was no answer. I left a detailed voicemail explaining the nature of the service, including the tasks to be performed and the estimated time required. I also provided my contact information and encouraged them to reach out if they had any questions or needed to reschedule. I will call back later to ensure we can coordinate a convenient time for the service. The homeowner's prompt response will help us proceed efficiently and address any concerns they might have.

Today, I successfully added 30 ounces of 410a refrigerant to the existing system. Although the customer is not yet prepared to replace the entire system, the added refrigerant has restored the system's functionality. I carefully checked the system's pressure levels and ensured that the refrigerant was evenly distributed throughout. After completing this task, I conducted a thorough inspection to confirm that the system is now back online and ready for cooling. The system is operating efficiently, and the customer can now enjoy a comfortable environment.

Today, I conducted a comprehensive service on the primary HVAC system and the garage mini-split. I began by washing the outdoor coils and changing the air filter. I then tested the primary drains and checked all electrical components. The condenser fan capacitor was found to be out of tolerance due to the fan motor overamping. Additionally, I noticed a significant amount of biological growth in the air handler, recommending the installation of a germicidal light to prevent future growth and improve air quality. The main unit was also found to be low on refrigerant, with the evaporator coil just 2 degrees away from freezing. I discussed these findings over the phone with the homeowner, who requested estimates for potential repairs. He decided not to proceed with any work today but plans to consult a comfort advisor for system replacement options. The system is currently operational and cooling.

I successfully replaced the existing drain valve on the water heater with a standard 1/4 turn valve, ensuring a secure and efficient water flow control. Additionally, I installed a noise alarm for the drain pan to alert the customer of any potential leaks. After completing the replacement, I conducted a thorough inspection of the water heater and its plumbing system, confirming that there were no leaks and that the water heater was functioning optimally. The plumbing inspection was also completed, ensuring all components are in proper working order.

I evaluated the main system after it displayed random power issues and cooling failures. Upon inspection, I discovered that the primary drain lines were tied together and clogged. I meticulously cleaned the lines, ensuring proper drainage and no leaks. Additionally, I installed pan strips in each unit to prevent future clogs and growth. The system now operates, cools, and drains correctly.

Upon arrival, I initiated the Super Tune-Up by meticulously cleaning the outdoor system's coils and verifying refrigerant pressures. I discovered low refrigerant levels and informed the customer, recommending repairs, which they declined. Noticing the compressor was over-amping, I suggested a compressor saver/soft-start kit to mitigate amperage and protect the compressor. The customer requested an estimate for future reference. Moving indoors, I assessed the temperature split, replaced the air filter, and inspected internal components. I flushed two gallons of water through the primary drain line to ensure proper drainage. The system was fully operational and cooling effectively.

I performed a comprehensive tuneup on the system, acknowledging its age and the need for ongoing maintenance. Upon arrival, the door entry motor was operating in reverse, which I corrected to restore functionality. I also identified a slow leak in the drain line around the air handler cabinet and replaced the connection to stop the leak. After testing with 2 gallons of water, no further leaks were detected. The system now maintains a stable 20° temperature split, ensuring efficient operation.

Upon arrival, I conducted a thorough evaluation and discovered water leaking from the emergency drain pan, which had dripped onto the decking and even reached the fire alarm. I promptly cleared the drain lines and installed a RM one germicidal white unit. After completing the installation, I tested the entire system to ensure it was functioning correctly. The minimal amount of water that dripped over the fire alarm was swiftly addressed, and all affected areas were dried off. The system is now fully operational, and I ensured everything was in perfect working order. Thank you for choosing our services.

Upon arrival, I conducted a thorough inspection of the newly installed system. I discovered that the fittings outside were not properly secured. I promptly tightened these fittings to ensure a secure connection. Additionally, I added the necessary freon to the unit, ensuring it was at the correct level. After these adjustments, I tested the unit to confirm it was functioning properly. The system is now operating efficiently, and I provided this service at no charge to the customer. My attention to detail and expertise ensured the installation was completed to the highest standard.

Upon evaluation, the unit's water was found in the emergency drain pan. The primary drain line had a partial fog, and the supply plenum had an air leak, causing condensation. I cleared the drain lines, ensured no water leakage from the primary drain pan, and resealed the air leaks on the evaporator coil. After allowing the seal to dry with the system off, the water issue is now resolved.

I conducted a comprehensive tune-up, thoroughly inspecting the entire system. This included checking refrigerant pressures, all electronic components, airflow, air quality, and drain lines. The customer's indoor air handler had numerous temporary fixes, so we opted for a more permanent solution. I installed germicidal lights and cleared the drain at no extra charge. After these adjustments, I tested the system and confirmed everything was functioning perfectly. However, one of the homeowner's filters was causing excessive static pressure, so I removed it. The homeowner will purchase and install a new filter. Thank you for choosing our services.

I conducted a comprehensive tune-up, starting with a thorough inspection of the customer's system and tire system. I checked refrigerant pressures and examined all electric components. The customer's system was drawing unusually high startup amps, which could potentially shorten the lifespan of the equipment. After discussing options, the customer opted for the top-tier solution of installing a soft start device on the outdoor equipment to enhance system longevity. Following the installation, I performed a detailed refrigerant test and verified that the rest of the system was functioning optimally.

Upon inspection, the condenser's dual run capacitor was found to be faulty, which was affecting its performance. Additionally, a clog and dirt accumulation were discovered within the condenser unit. The faulty capacitor was replaced, and the condenser was thoroughly cleaned to remove the clog and dirt. Post-repair, the condenser is now functioning optimally. The parts used for the repair are now accounted for in the profit and loss statement.