HVAC, Plumbing, & Electrical Services in Springtown, TX

Came to job to look at some plugs and lights not working in kitchen and got here and found a GFCI that was out and talk to customers about replacing it and also talked to him about doing that with the membership and customer wanted to do it with the membership and while I was here found a bunch of other issues and gave quotes to do a bunch of other things so customer wasn't interested in doing it at this exact moment but is having a plumbing issue with their water heater not heating and will be having someone come out very soon he said he would call us and the next day or two to schedule it I tried to schedule it with them while I was there but he didn't want to

2018 Armstrong Air Airhandler Checked and tightened all electrical connections Customer recently changed filters Heat strips were functional and within manufacture range Drain was clear and draining at this time Drain has no drain safety Blower Motor and wheel were acceptable Blower wires and housing have biological growth build up Evaporator coil was acceptable but has heavy rust build up 2018 Armstrong Air Heatpump Checked and tightened all electrical connections Dual run cap is below manufactured tolerance (weak) Primary electrical unit was acceptable Defrost board was acceptable Defrost is functional Refrigerant levels were acceptable at this time Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Waxed the top of the unit Fixes needed are dual run cap and adding drain safety Recommendations are Micro Air Soft start kit, UV 300 and HBPPLAN

Tune up on a trane unit. Inside unit all electrical components were tight and pulling proper amperage, blower motor was clean, evaporator coil was clean and acceptable, filter was changed out. Outside unit all electrical components were pulling proper amperage, cotton tractor at spec, fan was an ECM and pulling proper amperage, gauges were showing proper levels. Upon departure system was running properly.

Main system 2012 Rheem Airhandler Checked and tightened all electrical connections Removed filter due to filter being parachuted and 100% clogged Drain was clear and draining at this time Blower Motor and wheel were acceptable Blower cap was within manufacture range Evaporator coil is leaking refrigerant, found leak with leak detector Main system 2012 Rheem Heatpump Checked and tightened all electrical connections Dual run cap was within manufacture range Primary electrical unit was acceptable Defrost board was acceptable Refrigerant levels are low and evap coil is leaking Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Waxed the top of the unit Upstairs 2012 Rheem Airhandler Checked and tightened all electrical connections Customer recently changed filters Drain was clear and draining at this time Blower Motor and wheel were heavily compacted with dust,

Customer is going to pick up a new and call when he wants to have it installed

I want to pause this job and follow up with customer in 2 weeks from today

2022 Revolv Airhandler Checked and tightened all electrical connections Changed customer provided filters Drain was clear and draining at this time Heat strips were functional and within manufacture range Blower motor and wheel were acceptable Evaporator coil was acceptable 2022 Revolv Straight Cool Checked and tightened all electrical connections Dual run cap was within manufacture range Primary electrical unit was acceptable Refrigerant levels were acceptable at this time Compressor is pulling over max LRA Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed the condenser coils from the inside out Waxed the top of the unit Recommended Micro Air Soft start kit or compressor saver, UV light coil cleaning, pan treatment and HBPPLAN Setup plumbing visit for 3/4/26 12pm to give pricing on adding hose bibbs to the home confirmed by the office

Gave customer multiple estimates for water line to goat pen water heater and customer provided tub Please schedule water heater install second call on Thursday

Customer has dr appts and chose to schedule work for Thursday morning collected for membership

2012 Lennox Airhandler Checked and tightened all electrical connections Changed customer provided filter Drain was clear and draining at this time Heat strips were functional and within manufacture range Blower Motor and wheel were acceptable Blower cap is below manufacture tolerance Evaporator coil has heavy rust build up Found leaks on U-Joints of evaporator coil 2012 Lennox Straight Cool Checked and tightened all electrical connections Dual run cap cap is below manufacture tolerance on both fan and herm sides Primary electrical unit was acceptable Micro Air Soft start kit was functional Refrigerant levels are very low due to leak in evaporator coil, customer stated he's been adding a pound of 410A every year Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Waxed the top of the unit Recommended comfort advisor due to leaking evaporator coil and to the industry

2014 Carrier Airhandler Checked and tightened all electrical connections Heat kit is functional and within manufacture range Customer recently changed filters Drain was clear and draining at this time Drain does NOT have any drain safeties Blower Motor and wheel were acceptable Evaporator coil was acceptable U-joints on evaporator coil has heavy rust build up Ran a leak search on evap coil and could not find leaks at this time Supply plenum has biological growth build up 2014 Carrier heat pump Checked and tightened all electrical connections Dual run cap is weak and out of manufacture range Primary electrical unit was acceptable Defrost board was acceptable Defrost is functional Refrigerant levels were showing to be low Ran leak search on condenser coil and could not find a leak at this time Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Recommended UV300

2022 Lennox Airhandler Checked and tightened all electrical connections Heat kit is functional and within manufacture range Drain was clear and draining at this time Drain does NOT have any drain safeties Customer did not have an extra filter at this time Blower Motor and wheel were acceptable Light biological growth build up on blower housing Evaporator coil has light dust and dirt build up Condensate pan has biological growth build up 2022 Lennox Heatpump Checked and tightened all electrical connections Dual run cap was within manufacture range Primary electrical unit was acceptable Defrost board was acceptable Defrost is functional Refrigerant levels were acceptable at this time Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Waxed the top of the unit Recommended UV200 for biological and clean air, drain safety, Micro Air Soft start kit and replacement of

Mortex Airhandler Checked and tightened all electrical connections Customer did not have extra filters at this time Drain was clear and draining Heat strips were functional and within manufacture range Blower Motor and wheel were acceptable Evaporator coils have heavy rust build up but fins were acceptable Carrier Heatpump Checked and tightened all electrical connections Dual run cap is very weak recommended replacement Primary electrical unit was acceptable Defrost board was acceptable Defrost is functional Refrigerant levels were acceptable at this time Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Recommended replacement auxiliary Motor Starter installation of micro air soft start kit and antimicrobial pan treatment Installed micro airsoft start kit antimicrobial pantry mix and auxiliary motor starter

Two system super tune up perfomed today. Bedroom unit is s comfortmaker straight electric system installed in 2009. Main system is a propane furnace with a straight cool condenser installed in 2022. All electrical connections are tight with no corrosion. Refrigerant levels are in range. No drain safety switch is installed on the smaller bedroom unit. Suggest a duct cleanung for each system and a UV installed in each system to help improve air quality in the home both outdoor units were washed and waxed.

Recall on previous technician. Blower would tune on in heating but not in cooling. Previous technician replaced a fan relay and did not properly attach the common side to the fan relay so fan would not turn on in high speed. Attached common to relay and performed function check in heating and in cooling. System operating normally at time of departure.

2020 Goodman Gas Furnace Checked and tightened all electrical connections Drain was clear and draining at this time Ignition system is functional Al safeties are functional at this time Filter is in need of changing customer did not have one at this time Blower Motor and wheel were acceptable Evaporator coil was acceptable Supply plenum has biological growth build up 2020 Goodman Straight Cool Checked and tightened all electrical connections Dual run cap was within manufacture range Primary electrical unit was acceptable Refrigerant levels are slightly off due to the filter being COMPACTED Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Waxed the top of the unit Recommended Micro Air Soft start kit, UV 200 for biological growth and promote clean air as well as unit surge protection Customer agreed to install UV 200

Perform tune up on gas package unit Perform check on all components of gas package unit and condenser side found no issues at this time recommended adding microair soft start kit UV system and performing a level 1 duct cleaning customer agreed to do all three recommendations installed uv200 and micro airsoft start level 1 duct cleaning will be performed Monday 2/16/26 confirmed by Joe Customer paid $1,000 down payment and is financing the rest of 2,816.60 Application ID: 26-12-058521 Customer #698f850b5e056c8609486490

Customer looking for a 600 mini split, turned to plumbing trade

Super tune up performed today on a Goodman straight cool condenser with air handler installed in 2022. All electrical connections are tight with no corrosion. Heat strips are pulling proper amperage. X13 blower motor is acceptable. Blower wheel and evaporator coil are clean. Compressor and condenser fan motor are acceptable. It's is currently 50 degrees outside and technician is unable to get accurate refrigerant readings due to the outdoor temperature. Outdoor unit was washed and waxed. Highly suggest adding an r19 insulation level on top of the already existing attic insulation.

2/3/26 Talked with customer about repair. Decided to reschedule to this Friday 2/6/26. PER MARK W JESUS N Needs to be there to help

Upon arrival customer stated they had another company come out on the 22nd said that the system was completely out of refrigerant that company added five pounds of refrigerant and within a couple days customer notice system freezing up again and not working properly during evaluation hooked up gauges found refrigerant levels to be slightly low when system is running the suction line pressure drops below 30 and system goes out on low pressure cut off performed leak search on indoor evaporator coil could not find a leak perform leak search on condenser coil could not found a leak but did find a leak on the vapor line right at the brick of the home along with lots of oil from the refrigerant leaking talked with customer about replacing line set and adding line set cover along with adding refrigerant customer agreed to replace line set only charged for line set replacement today as the outdoor data tag is completely faded unable to find out how much system holds will charge for refrigerant

Customer states that another company had come out to give estimate for duct cleaning. They stated that the unit was full of biological growth and they had to clean it. Technician went into the attic with the homeowner and showed him that there was no visible biological growth on the inside of the system. There is some slight dust starting to form on the evaporator coil. Installed new UV bulb to ensure system stays clean and a level 1 duct cleaning is being performed on Wednesday the 28th. Payment has been collected d for the bulb replacement but the remainder will be paid upon completion of duct cleaning.

Pumped down unit replaced fixed orifice metering device and bi flow filter drier. Checked for any additional blockage in refrigerant line. Pulled vacuum to 500 microns. Released refrigerant and performed function check. System functioning properly in heating and cooling apon departure.

Mis wired the low voltage for the second heat sequencer causing the third heat strip to not be energized. Left with system heat

2018 Goodman Gas Furnace Checked and tightened all electrical connections Changed customer provided filter Drain was clear and draining at this time Ignition system was acceptable Ignition system is functional All safeties are functional at this time Blower Motor and wheel have dust and dirt build up Evaporator coil was acceptable Supply plenum has biological growth build up Duct work is original to the home and discussed concerns about on bedroom being more uncomfortable than others Customer had insulation added last year Insulation levels are acceptable 2018 Goodman Straight Cool Checked and tightened all electrical connections Dual run capacitor was within manufacture range Primary electrical unit was acceptable Refrigerant levels were off at this time due to cooler outdoor temps Fan blades and motor were acceptable Condenser coils were acceptable Cleared debris from the bottom of the unit Washed condenser coils from the inside out Waxed the top of the unit Re